C O M P A Q (R)  C O M P U T E R  C O R P O R A T I O N

                    ATI RAGE IIC Graphics Adapter Driver
                 

1.  INTRODUCTION

    This file contains the driver installation instructions for
    an extraction of the ATI RAGE IIC Graphics Adapter Driver files.

2.  MANUAL DRIVER INSTALLATION

     1.	Run the Display program located in the Control Panel, under Settings 
	in the Start menu.  Alternatively, position the cursor on the 
        background of the desktop, click the right mouse button, then select 
        Properties from the popup menu.

     2.	Select the Settings page.

     3.	Select Display Type....

     4.	Select Change... from the display options.

     5.	Select Have Disk...

     6.	Windows NT 4.0 will prompt you for the correct path.  Enter the path 
        containing the extracted ATI RAGE IIC Graphics Adapter Driver files and 
        select the ATIINTAH.INF file.

     7.	A list of ATI graphics accelerators will be displayed.  Select the one 
        you are using and click the OK button.

     8.	Windows NT 4.0 will once again prompt for confirmation.  All 
        appropriate files are then copied to the hard disk.

     9.	Restart Windows NT 4.0.  Windows NT 4.0 will start up using the ATI 
        drivers.

    10.	NT 4.0 will boot into a default mode and start the Display applet 
        allowing for mode selection.

-----------------------------------------------------------------------------
     Copyright © 2001, Compaq Computer Corporation. All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks 
                      of their respective companies.