i bought this of eBay for £38 + p&p, it needed a bit of a clean, but apart from that it works fine,
plus all it's calibration seals were intact (well untill i took the top cover off),
the one downside is that i didn't know that this model came as a base unit (back in the day),
you would order it with the add-on cards that you needed,
so as you can guess the one i got is just the base model, although it can only measure DC,
it can read down to 1 micro volt, so it will come in really handy,
plus that no-ones been in it since it was last calibrated, makes it even more worth the money.
(IMG:racal_5000_1.jpg)(IMG:racal_5000_2.jpg)(IMG:racal_5000_3.jpg)(IMG:racal_5000_4.jpg)(IMG:racal_5000_5.jpg)

(IMG:racal_5000_6.jpg)
you can see here that all they did was cut off the neon indicaters for the cards that were not installed.

(IMG:racal_5000_7.jpg)
here is where the AC/RMS, OHMs and the Ratio cards would of gone.

(IMG:racal_5000_8.jpg)
here's a little mod i added to surpport the controls a bit better, as they were not bolted to anything.

(IMG:racal_5000_9.jpg)(IMG:racal_5000_10.jpg)
Racal-DANA 5000 Service Manual - (https://freeservicemanuals.info/en/servicemanuals/viewmanual/Miscellaneous/MODEL5000/None/None/RACALDANA/)