Commands: ! ? REM cd dir find_command help history instances ls man pwd sleep syntax system_time usage ---- emta_console exit mbufShow memShow mutex_debug ping read_memory reset routeShow run_app shell stackShow taskDelete taskInfo taskPrioritySet taskResume taskShow taskSuspend taskTrace version write_memory zone ---- [Console] [HeapManager] [V-Support] [cablemedea] [embedded_target] [emta] [flash] [forwarder] [ip_hal] [msgLog] [network_interface] [non-vol] [pingHelper] [snoop] Command Table: Built-in Commands (built-in) Description: System-wide, built-in commands that are handled by the Console Thread. These commands are always available, regardless of which command table is active. Available Commands: ! ? REM cd dir find_command help history instances ls man pwd sleep syntax system_time usage ---- Command Table: Stand-Alone PS Commands (sPS) Description: Stand-Alone PS Commands Available Commands: emta_console exit mbufShow memShow mutex_debug ping read_memory reset routeShow run_app shell stackShow taskDelete taskInfo taskPrioritySet taskResume taskShow taskSuspend taskTrace version write_memory zone ---- Available sub-command tables: [Console] [HeapManager] [V-Support] [cablemedea] [embedded_target] [emta] [flash] [forwarder] [ip_hal] [msgLog] [network_interface] [non-vol] [pingHelper] [snoop] ---- Command Table: Telnet/SSH Interactive Session Commands (Console) Description: Telnet/SSH Interactive Session Commands Available Commands: exit reset set show ---- Available sub-command tables: [pingHelper] [system] ---- Command Table: Ping Commands (pingHelper) Description: Ping Helper Thread settings and commands. These commands allow you to set the ping utility up with precise control over packet sizes, timeout values, etc. Available Commands: all_sizes end_size hs_nowait hs_wait ip_address ip_stack ip_sweep number_of_pings ping restore_defaults show_settings start_size stats step_amount stop time_between_pings verbosity verify_enable wait_enable wait_time ---- Command Table: System Command Table (system) Description: System commands Available Commands: show ---- Command Table: HeapManager Commands (HeapManager) Description: Broadcom Heap Manager (malloc/free) settings and commands. Available Commands: bcheck bcheck_crash bcheck_enable last_error maxAlloc memShow stats threadUsage trace walk walk_alloc ---- Command Table: V-Support Commands (V-Support) Description: V-Support is a Vonage Voip self help diagnostic and support tool. Available Commands: dns_lookup_by_local_server dns_lookup_by_voip_server get_gr909_test_results get_last_10call_stats get_wan_link_status packet_jitter_test ping_default_gateway ping_external_host ping_local_dns_server ping_loopback ping_voip_dns_server run_all_test ---- Command Table: CableMedea Commands (cablemedea) Description: CableMedea Command Table Available Commands: arp_show arppacket_show capt_show fwr_show nat_show ppp_session_table reload_lan_config traceroute usfs_show wandata_show ---- Available sub-command tables: [bwest] [dhcps] [dns] [pppoe] [rip] [route] [sip] [upnp] ---- Command Table: Bandwidth Estimation Commands (bwest) Description: Bandwidth Estimation Command Table Available Commands: show start stop ---- Command Table: Dhcps Commands (dhcps) Description: Dhcps Command Table Available Commands: add_lease enable remove_lease show ---- Command Table: Dns Commands (dns) Description: Dns Command Table Available Commands: dns_debug dns_show gethostbyaddr gethostbyname ---- Command Table: Pppoe Commands (pppoe) Description: Pppoe Command Table Available Commands: pppoe_show ---- Command Table: Rip Commands (rip) Description: Rip Command Table Available Commands: rip_show ---- Command Table: Route Commands (route) Description: Route Command Table Available Commands: reload_route_service route_show ---- Command Table: Sip Commands (sip) Description: Sip Command Table Available Commands: bye calls cancel clients invite show ---- Command Table: Upnp Commands (upnp) Description: Upnp Command Table Available Commands: control_if device_discovery discovery_show enable notify_show show ---- Command Table: Embedded Target Commands (embedded_target) Description: Commands to control the embedded target platform. Available Commands: bcmalloc_show bcmalloc_walk cache_test cp0_read cp0_write dcache icache sdram_test test_bcmalloc ---- Command Table: Embedded MTA Commands (emta) Description: Commands for the Embedded MTA Available Commands: acquire_lease addFirewallRule announcementDload anti_spoof dataAccessorGet dataAccessorSet deleteFirewallRule dhcp_init dload emta_console firewallEnable initState ip_get ip_initialize lineState log logTimestampFlag mtaInfoGet new_line option_get printCert release_lease renew_lease reset run_app server_get setCountry showAnnounce showFirewallState showTelrootCert snmpOperMode snmpV2ComNamRO snmpV2ComNamRW suboption_get test_v3 ---- Available sub-command tables: [endpt] ---- Command Table: Embedded MTA Endpoint Commands (endpt) Description: Commands for the Embedded MTA Available Commands: apmSts checkAssert configNetwTest dlbConfig dlbEnable dlbStatic dlbStats fAssert faxrStats getBuff getCaps getCnt getRegs hapInetCfgSet icpCalibrate icpStart icpStop ipcStats pwr readHookState readMem readSlicMem ring rxGain stackShow tpd tr57Enable txGain vhdInfo vhdJBRegs vhdLoopback vhdStats writeSlicMem ---- Command Table: Flash Driver Commands (flash) Description: Commands to control the flash device driver. Available Commands: autoTest cfi_show close configRegion deinit erase init open read readDirect show write writeArray ---- Command Table: Forwarder Commands (forwarder) Description: Commands to show/change the Forwarder state. Available Commands: filter_logging_enable filter_logging_show halif_show ip_filter_logging log_packets lt_add lt_clear lt_delete lt_max_entries lt_show mac_filter_logging port_filter_logging proto_filter_logging show ---- Command Table: IP Stack HAL Commands (ip_hal) Description: Commands to manage IP stacks and related tasks. Available Commands: bootloader clientif_debug dhcpc_debug dhcpc_show dload hal_show ip_addr_show ipconfig kill_remote_dhcp_server lease_show show test ---- Command Table: Message Log Settings Commands (msgLog) Description: Commands for changing Message Log Settings. These commands allow you enable and disable display fields and severity levels for individual objects or for groups of objects. Available Commands: fields severities show_settings ---- Available sub-command tables: [remoteAccess] ---- Command Table: Remote Access Server Commands (remoteAccess) Description: Remote Access (Telnet/HTTP/SSH/etc) settings and commands. These commands allow you to configure the Telnet, SSH or other supported servers. Available Commands: read_default_settings restart_server start_server stop_server ---- Command Table: Network Interface Commands (network_interface) Description: Commands to show/change the Network Interface state. Available Commands: show transmit ---- Available sub-command tables: [ethernet] ---- Command Table: Ethernet Network Interface Commands (ethernet) Description: Commands to show/change the Ethernet Network Interface state. Available Commands: read_mii write_mii ---- Command Table: Non-Volatile Settings Commands (non-vol) Description: Commands to change the non-volatile settings for the application. Available Commands: clear_device defaults del_extra_data flush manufactured read show stats tftp_read tftp_write write ---- Available sub-command tables: [LcdDisplay] [bfcApp] [cap] [cdp] [csp] [echoClient] [emtaCallOpt] [emtaConfig] [emtaCustomer] [emtaIvr] [emtaLineHw] [emtaProv] [emtaSecurity] [emtaSip] [emtaSipOpts] [firewall] [halif] [parental] [ppp] [psdev] [qos] [rg] [sip] [telemetry] [userif] [von_qos] ---- Command Table: Lcd Display NonVol Commands (LcdDisplay) Description: Commands to show/change the EMTA LCD Display NonVol Settings-> Available Commands: NormalBrightness VmBrightness blinkLed clear_device debugPrintf defaultMsgPeriod defaults del_extra_data eraseCallLogList eraseLcdMessages errorMsg flashLed {flush} homeWiringWizardOption infoMsg line1EngDefaultMsg line1EspDefaultMsg line1FreDefaultMsg line2EngDefaultMsg line2EspDefaultMsg line2FreDefaultMsg lineEngDefaultMsg lineEspDefaultMsg lineFreDefaultMsg listErrorMsg listLcdMessages manufactured menuLang printBoardType read readChipSelect1 runLcdTest scrollTime setAllLedsOff setAllLedsOn setContrast setLedOff setLedOn show stats DisplayDateTime:profileDownloadStarte- tftp_read tftp_write write writeChipSelect1 ---- Command Table: BFC Application Settings Commands (bfcApp) Description: Commands to change the non-volatile settings for the BFC Application. Available Commands: auto_console clear_device console_stop_prompt defaults del_extra_data driver_init_prompt {flush} manufactured read show stats tftp_read tftp_write write ---- Command Table: Cap NonVol Commands (cap) Description: Commands to show/change the Cap NonVol settings. Available Commands: add_cap_mapping add_passthrough clear_device defaults del_cap_mapping del_extra_data del_passthrough {flush} manufactured primary_mode provisioning_mode read show stats tcp_timeout tftp_read tftp_write udp_timeout wanipconnection_enable write ---- Command Table: Cdp NonVol Commands (cdp) Description: Commands to show/change the Cdp NonVol settings. Available Commands: add_lan_addr add_wan_data add_wan_server cds_settings clear_device defaults del_extra_data del_lan_addr del_wan_data del_wan_server {flush} lan_trans_action lan_trans_threshold manufactured read show stats tftp_read tftp_write wan_ip_addr_cnt write ---- Command Table: Csp NonVol Commands (csp) Description: Commands to show/change the Csp NonVol settings. Available Commands: alert_period alert_threshold clear_device defaults del_extra_data dload event_type1_enable event_type2_enable event_type3_enable {flush} manufactured policy_enable read show stats tftp_read tftp_write write ---- Command Table: Echo Client Commands (echoClient) Description: Commands to provision parameters used in Echo tests. Available Commands: auth_algorithm auth_key_serial auth_shared_key clear_device default_udp_port defaults del_extra_data downstream_jitter_threshold echo_privacy echo_server_URL1 echo_server_URL2 echo_server_URL3 {flush} manufactured packet_loss_threshold read round_trip_delay_threshold show stats tftp_read tftp_write upstream_jitter_threshold write ---- Command Table: EMTA Call Option NonVol Commands (emtaCallOpt) Description: Commands to show/change the EMTA Call Option NonVol Settings. Available Commands: anon_call_block call_waiting clear_device cng defaults del_extra_data emergency_call_transfer emergency_call_waiting emergency_caller_id emergency_conf emergency_digits emergency_local_hangup feature_control feature_key feature_key_remove {flush} hold_reminder_enable jitter_buffer_max jitter_buffer_min jitter_buffer_nom jitter_fixed_enable join_call_digits manufactured msg_waiting prefixes_table read rtcp_interval rtcp_xr second_dial_tone send_caller_id show stats suffixes_table tftp_read tftp_write tone_config write ---- Command Table: EMTA Config NonVol Commands (emtaConfig) Description: Commands to show/change the EMTA Config NonVol Settings. Available Commands: call_signalling_config clear_device dc_offset_ring_enable defaults del_extra_data dhcp_enable dhcp_option dhcp_settings dial_tone_pass_thru_enable dload_inhibit dns_naptr_enable dns_negative_cache_max_TTL dns_srv_enable emta_dns emta_dns_perm firewall_disable {flush} hv_ring_enable ip_stack load_balancing_enable manufactured max_cpe_includes_emta msg_log_fields option122 phs_enable read rtp_port severities show standalone stats tftp_read tftp_write ver_in_http_ua write ---- Command Table: EMTA Customer NonVol Commands (emtaCustomer) Description: Commands to show/change customer specific NonVol Settings. Available Commands: clear_device config_status defaults del_extra_data delayed_reset fax_keys {flush} manufactured perm_prov_server_addr perm_prov_server_type prov_download_method prov_download_port prov_good_port prov_server_addr prov_server_type read resynch_interval show sip_notify stats tftp_read tftp_write voice_status write ---- Command Table: EMTA IVR NonVol Commands (emtaIvr) Description: Commands to show/change the EMTA IVR NonVol Settings. Available Commands: clear_device defaults del_extra_data erase {flush} inter_delay_time ivr_language manufactured read repetitions show sip_uri stats tftp_read tftp_write write ---- Command Table: EMTA Line Hardware NonVol Commands (emtaLineHw) Description: Commands to show/change the EMTA SIP Hardware NonVol Settings. Available Commands: auto_retest_interval auto_testing batt_rev_before_local_ringing batt_rev_on_local_connect batt_rev_on_remote_connect clear_device cpc_delay cpc_signal_duration cpc_signal_mode cpc_wait_duration defaults del_extra_data {flush} manufactured max_hook_flash_time min_hook_flash_time off_hook_current on_hook_status on_hook_voltage peak_ring_voltage read ringing_dc_offset ringing_freq ringing_waveform show slic_pol_pos stats tbr test_begin test_foreign_emf test_hazardous_pot test_resistive_faults test_ringers test_rxr_off_hook test_tod tftp_read tftp_write tone_timeout write ---- Command Table: EMTA Provisioning NonVol Commands (emtaProv) Description: Commands to show/change the EMTA Provisioning NonVol Settings. Available Commands: auto_enable checksum clear_device config_max_retry config_min_retry config_retry_period defaults del_extra_data factory_defaults filename {flush} fw_auto_change fw_filename fw_retry hash_dir key manufactured perm_filename perm_fw_filename perm_hash_dir perm_hw_version perm_key perm_server_addr perm_server_type prov_time read server_addr server_loc server_type show stats tftp_read tftp_write username userpassword version write xml_file ---- Command Table: EMTA Security NonVol Commands (emtaSecurity) Description: Commands to show/change the EMTA Security NonVol Settings. Available Commands: alternate_telephony_root_cert clear_device defaults del_extra_data device_cert {flush} manufactured read show stats tftp_read tftp_write write ---- Command Table: EMTA SIP NonVol Commands (emtaSip) Description: Commands to show/change the EMTA SIP NonVol Settings. Available Commands: adaptive_codec adaptive_period adaptive_wait_time auth_name clear_device cpc_timer crit_pdr_threshold defaults del_extra_data dhcp_release dhcp_renew dial_plan digit_timer digit_timer_flash digit_timer_partial dtmf_mime_type dtmf_relay_payload_type dtmf_relay_power dtmf_relay_state echocan_enable emergency_call_codec enable_service eurocall_enable fax_packet_period feature_str {flush} hook_flash_state hookflash_mime_type ipdial_enable line_enable local_port manufactured nat_keepalive_dest nat_keepalive_interval nat_keepalive_message natwan_address natwan_port num_ports outbound_proxyaddr outbound_proxyport packet_period power_source prov_debug proxy_address proxy_port read reg_addr_rec reg_address reg_port remote_disconnect_timer restart_sip resync_via_notify rtp_tos rx_gain service_url show sig_tos sip_accept_language sip_debug sip_server_name sip_ua_header sip_ua_name stats stun_address stun_port tftp_read tftp_write timer_min_sess timer_reg timer_reg_retry timer_sess transport tx_gain user_id user_name user_pw vad_mode vbd_enable voice_encoder voice_encoder_list warn_pdr_threshold write ---- Command Table: EMTA SIP Options NonVol Commands (emtaSipOpts) Description: Commands to show/change the EMTA SIP Hardware NonVol Settings. Available Commands: auto_recovery auto_recovery_fast_reboots auto_recovery_status auto_recovery_timeout call_hold_type clear_device defaults del_extra_data dial_tone_on_svc {flush} good_source_sip_proxy manufactured msg_stutter p_asserted_identity read repeat_dial_duration repeat_dial_interval resubscribe_interval show sips_uri_scheme stats tftp_read tftp_write timer tls_addr tls_cache_enable tls_client_auth tls_encryption tls_fallback_enable tls_keep_alive tls_port tls_recover_timeout tls_server_auth vmwi_signaling write ---- Command Table: Firewall NonVol Commands (firewall) Description: Commands to show/change the Firewall NonVol settings. Available Commands: clear_device defaults del_extra_data domain_add domain_policy domain_remove features filter_end_day filter_end_time filter_policy filter_start_day filter_start_time {flush} keyword_add keyword_remove manufactured read show stats syslog_port syslog_protocol syslog_server tftp_read tftp_write write ---- Command Table: HalIf NonVol Commands (halif) Description: Commands to show/change the HalIf NonVol settings. Available Commands: bcmalloc bcmalloc_numSizes board_rev clear_device defaults del_extra_data eth_reject_cam {flush} interfaces lan_eth_autoneg lan_eth_duplex lan_eth_enable lan_eth_speed mac_address manufactured power_save_enable read show stats tftp_read tftp_write wan_eth_autoneg wan_eth_duplex wan_eth_speed wdog_enable wdog_timeout write zone ---- Command Table: ParentalCtrl NonVol Commands (parental) Description: Commands to show/change the Parental Ctrl NonVol settings. Available Commands: category_add category_remove clear_device content_policies createCustomer createLicense defaults del_extra_data domain_add domain_remove {flush} inactivateLicense manufactured reactivateLicense read sessions show stats tftp_read tftp_write unsubscribe user_profiles write ---- Command Table: PPP NonVol Commands (ppp) Description: Commands to show/change the PPP NonVol Settings. Available Commands: clear_device defaults del_extra_data {flush} l2tp_preshared_phrase manufactured mppe_enable ppp_address_range ppp_debug ppp_server_subnet ppp_server_users read show stats tftp_read tftp_write write ---- Command Table: PsDev NonVol Commands (psdev) Description: Commands to show/change the PsDev NonVol settings. Available Commands: agg_wireless_admin_status cablehome_mode cablehome_upnp cableoffice_mode clear_device defaults del_extra_data dloadTLSKey {flush} manufactured prov_key_timeout prov_timer read show stats tftp_read tftp_write write ---- Command Table: QoS NonVol Commands (qos) Description: Commands to show/change the Rate Shaping Quality of Service NonVol Settings. Available Commands: bwEstTimer bw_scaling_factor clear_counts clear_device clear_log defaults del_extra_data dss_enable dss_idle_enable dydss_current_bw dydss_equil_diff dydss_expo_rampdown dydss_frac_discard_threshold dydss_frac_loss_threshold dydss_high_queue_util_rampdown dydss_init_bw dydss_listen_mos_threshold dydss_max_bw dydss_max_enable dydss_min_bw dydss_num_voice_stream_entries dydss_prev_call_max_bw dydss_rampdown_timer dydss_rampup_bw_adder dydss_rampup_timer dydss_voice_stream_entry_timeout {flush} log manufactured mgr_lan_streams mgr_log_size priority_bw priority_queue_size priority_queue_threshold qos_rule_show qos_rule_test read show stats tftp_read tftp_write traffic_classifier_enable traffic_shaper_auto traffic_shaper_enable update_map write ---- Command Table: Residential Gateway NonVol Commands (rg) Description: Commands to show/change the Residential Gateway NonVol settings. Available Commands: clear_device defaults del_extra_data {flush} lan_feature_config manufactured max_mtu_size nat_show password primary_default_override read realm rg_enable set_feature_enable show stats tftp_read tftp_write wan_connection_type wan_feature_config write ---- Command Table: SIP NonVol Commands (sip) Description: Commands to show/change the SIP NonVol Settings. Available Commands: add_client add_proxy clear_device defaults del_extra_data {flush} manufactured read remove_client remove_proxy show stats tftp_read tftp_write write ---- Command Table: Telemetry Commands (telemetry) Description: Commands for telemetry. Available Commands: backoff_interval clear_device defaults del_extra_data enable_encrypt enable_env enable_event enable_user env_timeout event_agg_timeout event_queue_timeout failover_interval {flush} hb_timeout hb_wait manufactured max_percent packet_cleanup_timeout packet_queue_size read resubmit_interval server_port show show_list stats tele_server1 tele_server2 telemetry test_env_or_user test_hb 3 DHCPc: No valid offers to select; need to send discover again. tftp_read tftp_write user_timeout write ---- Command Table: User Interface NonVol Commands (userif) Description: Commands to show/change the Message Log NonVol settings. Available Commands: clear_device defaults del_extra_data dhcp_settings fields {flush} http_acl_host_add http_acl_host_remove http_acl_hosts_clear http_admin http_adv_ipstacks http_enable http_ipstacks http_password_idle_timeout http_password_seed http_socket_show http_tech_support http_user inactivity_timeout ip_stack_number manufactured password perm_admin_password read remote_access_port severities show ssh_enable ssh_ipstacks stats telnet_enable telnet_ipstacks tftp_read tftp_write user_name web_access_admin web_access_tech web_access_user write ---- Command Table: Vonage QoS NonVol Commands (von_qos) Description: Commands to show/change the port list and port priority for applications http/mn Available Commands: clear_device defaults del_extra_data {flush} manufactured port_list port_priority read show stats tftp_read tftp_write write ---- Command Table: Ping Commands (pingHelper) Description: Ping Helper Thread settings and commands. These commands allow you to set the ping utility up with precise control over packet sizes, timeout values, etc. Available Commands: all_sizes end_size hs_nowait hs_wait ip_address ip_stack ip_sweep number_of_pings ping restore_defaults show_settings start_size stats step_amount stop time_between_pings verbosity verify_enable wait_enable wait_time ---- Command Table: Snoop Commands (snoop) Description: Commands to show/change the state of Snoop objects. Available Commands: debug enable priority show ----