____ _ _ _ _ _ _ ____
| _ \(_) ___| |__ __ _ _ __ __| |___| | | |_ _| |__ / ___|___ _ __ ___
| |_) | |/ __| '_ \ / _` | '__/ _` / __| |_| | | | | '_ \| | / _ \| '_ ` _ \
| _ <| | (__| | | | (_| | | | (_| \__ \ _ | |_| | |_) | |__| (_) | | | | | |
|_| \_\_|\___|_| |_|\__,_|_| \__,_|___/_| |_|\__,_|_.__(_)____\___/|_| |_| |_|
File: cp002559.txt - Size: 1.698KBs - >Download<
C O M P A Q (R) C O M P U T E R C O R P O R A T I O N
ATI RAGE IIC Graphics Adapter Driver
1. INTRODUCTION
This file contains the driver installation instructions for
an extraction of the ATI RAGE IIC Graphics Adapter Driver files.
2. MANUAL DRIVER INSTALLATION
1. Run the Display program located in the Control Panel, under Settings
in the Start menu. Alternatively, position the cursor on the
background of the desktop, click the right mouse button, then select
Properties from the popup menu.
2. Select the Settings page.
3. Select Display Type....
4. Select Change... from the display options.
5. Select Have Disk...
6. Windows NT 4.0 will prompt you for the correct path. Enter the path
containing the extracted ATI RAGE IIC Graphics Adapter Driver files and
select the ATIINTAH.INF file.
7. A list of ATI graphics accelerators will be displayed. Select the one
you are using and click the OK button.
8. Windows NT 4.0 will once again prompt for confirmation. All
appropriate files are then copied to the hard disk.
9. Restart Windows NT 4.0. Windows NT 4.0 will start up using the ATI
drivers.
10. NT 4.0 will boot into a default mode and start the Display applet
allowing for mode selection.
-----------------------------------------------------------------------------
Copyright © 2001, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered trademarks
of their respective companies.