____  _      _                   _     _   _       _      ____                
|  _ \(_) ___| |__   __ _ _ __ __| |___| | | |_   _| |__  / ___|___  _ __ ___  
| |_) | |/ __| '_ \ / _` | '__/ _` / __| |_| | | | | '_ \| |   / _ \| '_ ` _ \ 
|  _ <| | (__| | | | (_| | | | (_| \__ \  _  | |_| | |_) | |__| (_) | | | | | |
|_| \_\_|\___|_| |_|\__,_|_|  \__,_|___/_| |_|\__,_|_.__(_)____\___/|_| |_| |_|

SOFTPAQ NUMBER: SP16075
PART NUMBER: 195295-002
FILE NAME: N/A
TITLE: Professional Workstation AP400/AP500 System ROMPaq
VERSION: 686W5_07/14/99 Rev A 
LANGUAGE: English (US)

DIVISIONS: Workstations

PRODUCTS AFFECTED: 
     Professional Workstation AP400: All Models
     Professional Workstation AP500: All Models

OPERATING SYSTEM: Microsoft Windows 2000
                  Microsoft Windows 98
                  Microsoft Windows 95
                  Microsoft Windows for Workgroups 3.11
                  Microsoft Windows 3.1
                  Microsoft Windows NT 4.0
                  Microsoft Windows NT 3.51
                  Microsoft Windows NT 3.1
                  Microsoft MS-DOS
                 
SYSTEM CONFIGURATION: N/A

PREREQUISITES: N/A

EFFECTIVE DATE: March 08, 2001

ELECTRONIC DISTRIBUTION ALLOWED: Yes

SOFTPAQ UTILITY VERSION: 5.0       

SUPERSEDES: SP15791

DESCRIPTION:
This SoftPaq creates the ROMPaq Upgrade Diskette, which allows a user to 
upgrade the System ROM in the Workstation models listed below.

ENHANCEMENTS/FIXES:
- Corrected a problem of autoconfiguration assigning an I/O address that does not 
  align with what the I/O card was requesting.

- Corrected a problem that caused the computer to lock up on a warm boot after 
  System Software Manager (SSM) had completed a remote event and attempted to 
  perform a shutdown/restart.

HOW TO USE:

1.  Obtain a formatted 1.44-MB diskette and place it in your A: drive.

2.  Download the SoftPaq to a directory on your hard drive and change to that 
directory.  The file that is downloaded is an executable with a filename based 
on the SoftPaq Number above.

3.  From that drive and directory, execute the downloaded file and follow the 
on-screen instructions to build the ROMPaq diskette.

4.  After the diskette has been created, you may delete the SoftPaq file downloaded 
in step 2.

5.  Place the newly created diskette in the A: drive of the computer to be upgraded 
or restored and cycle system power to boot from the ROMPaq diskette.

6.  Follow the on-screen instructions to select the v7.14 (07/14/99) Compaq System 
ROM and flash the firmware.

WARNING:  DO NOT TURN OFF POWER OR ATTEMPT TO REBOOT THE COMPUTER DURING THE 
UPGRADE PROCESS!!!


Copyright 2001, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies