____  _      _                   _     _   _       _      ____                
|  _ \(_) ___| |__   __ _ _ __ __| |___| | | |_   _| |__  / ___|___  _ __ ___  
| |_) | |/ __| '_ \ / _` | '__/ _` / __| |_| | | | | '_ \| |   / _ \| '_ ` _ \ 
|  _ <| | (__| | | | (_| | | | (_| \__ \  _  | |_| | |_) | |__| (_) | | | | | |
|_| \_\_|\___|_| |_|\__,_|_|  \__,_|___/_| |_|\__,_|_.__(_)____\___/|_| |_| |_|

I have had this for about 8 or 9 years now (1998-99) and i would really like to see it working,
it powers up and shows the ICL Copyright 1986 and the Diagnostic Program works (which is enabled by a Switch on the back of the Terminal),
as far as i know that if it's connected up to a Mainframe/Computer or something like that,
then all it should do is Dump data (on request) to the Terminal from the Mainframe/Computer that it's connected to.
I have had a look on the internet for this Terminal but can't seem to find anything,
but i did find out about some of the Chips in the Terminal,
it looks like the "LINE INPUT" is TTL and the "COMMS A" port looks like it's a Serial Port,
i think this Terminal use to be used on a UNIX based Mainframe/Computer.
I use Linux (which is based on UNIX) on my PC and would really love it if i could use this Terminal on my Linux PC,
so if anyone can help me out with this then that would be really cool.
(IMG:icldrs1.jpg)(IMG:icldrs2.jpg)(IMG:icldrs3.jpg)

Thanks to Pete for the help he gave me regarding this terminal,
now i know what all the ports are for and now i know that all i need is a MicroLan 2 Card to get it working,
the not so good bit is that a MicroLan 2 Card might be hard to find,
but i'm sure one will turn up on eBay one day.
Update.
(IMG:drsman1.jpg)(IMG:drsman2.jpg)(IMG:drsman3.jpg)(IMG:drsman4.jpg)(IMG:drsman5.jpg)(IMG:drsman6.jpg)

this has been swapped for the ELF Terminal